ASTM B564 UNS N06625 Nuts, ASTM B564 UNS N06625 Bolts, ASTM B564 UNS N06625 Threaded Rods, ASTM B564 UNS N06625 Screws, ASTM B564 UNS N06625 Studs Supplier in Mumbai, India.
Nickel-iron-chromium alloys are designated by the UNS N06625 designation. UNS N06625 is a nickel-based alloy that can endure temperatures of up to 1100 degrees Fahrenheit (593 degrees Celsius). When creep and rupture resistance are required at temperatures above 1100°F (593°C), UNS N06625 alloys are annealed to generate regulated grain size for the greatest performance in this temperature range. UNS N06625 is a nickel-iron-chromium-tungsten alloy used for creep and rupture resistance at temperatures above 1100°F (593°C). It's annealed to get the best results at this temperature range.
Chemical Composition
| UNS |
Element |
Composition, % |
| Ni |
Cu |
Fe |
Mn |
C |
Si |
S |
Cr |
Al |
Ti |
Nb + Ta |
Mo |
P |
W |
Co |
V |
| UNS N06025 |
Ni-Cr-Fe-Al Alloy |
balance |
0.10 |
8.0-11.0 |
0.15 |
0.15-0.25 |
0.5 |
0.01 |
24.0-26.0 |
1.8-2.4 |
0.1-0.2 |
... |
... |
0.02 |
... |
... |
... |
Mechanical Properties
| Material and Condition |
Maximum Section Thickness, in. (mm) |
Tensile Strength, min, ksi (MPa) |
Yield Strength, 0.2 % Offset, min, ksi (MPa) |
Elongation in 2 in. or 50 mm or 4D, min, % |
| Nickel-chromium-iron-aluminum alloy UNS N06025, solution annealed |
Up to 4 (102) Over 4 (102) to 12 (305) incl |
98 (680) 84 (580) |
39 (270) 39 (270) |
30 15 |